The requirements for marking of controls and instruments are found
in 7.4 and in Table C.3 of the general standard. Additional requirements for
marking of controls and instruments relating to ALARM SYSTEMS in ME EQUIPMENT and in ME SYSTEMS are found in the subclauses listed in Table B.1.
Table B.1 – Cross-reference of marking
|
Description |
Clause or subclause |
|
ALARM CONDITION, priority |
6.3.2.2 |
|
ALARM CONDITION, visual indication |
6.3.2.2 |
|
ALARM CONDITION, visual indication, multiple |
6.3.2.2 |
|
ALARM LIMIT, automatically adjusted |
6.6.2.2 |
|
ALARM LIMIT, OPERATOR adjusted |
6.6.2.1 |
|
ALARM OFF, means of control |
6.8.5 Table 5 |
|
ALARM OFF, state indication |
6.8.5 Table 5 |
|
ALARM PAUSED, means of control |
6.8.5 Table 5 |
|
ALARM PAUSED, visual indication |
6.8.5 Table 5 |
|
ALARM RESET, means of control |
|
|
AUDIO OFF, means of control |
6.8.5 Table 5 |
|
AUDIO OFF, visual indication |
6.8.5 Table 5 |
|
AUDIO PAUSED, means of control |
6.8.5 Table 5 |
|
AUDIO PAUSED, visual indication |
6.8.5 Table 5 |
|
Failure of remote communication of ALARM CONDITION |
6.11.2.2 |
NOTE Guidance on using markings to help avoid FALSE POSITIVE and NEGATIVE ALARM CONDITIONS is given in A.1.3.