2 Normative references

הערה לנספח: אנחנו לא בודקים את הקשר בין תקן זה לבין התקנים הנזכרים כאן

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

IEC 60417, Graphical symbols for use on equipment

IEC 60601-1:2005, Medical electrical equipment – Part 1: General requirements for basic safety and essential performance

IEC 60601-1-2:----2), Medical electrical equipment – Part 1-2: General requirements for basic safety and essential performance – Collateral Standard: Electromagnetic compatibility – Requirements and tests

IEC 60601-1-6:---- 3), Medical electrical equipment – Part 1-6: General requirements for basic safety and essential performance – Collateral standard: Usability

IEC 60651:1979 4), Sound level meters

Amendment 1 (1993)

Amendment 2 (2000)

ISO 3744:1994, Acoustics – Determination of sound power levels of noise sources using sound pressure – Engineering method in an essentially free field over a reflecting plane

ISO 7000:1989, Graphical symbols for use on equipment – Index and synopsis

—————————

2) A second edition of IEC 60601-1-2 exists, published in 2004 under the title Medical electrical equipment – Part

1-2: General requirements for safety – Collateral Standard: Electromagnetic compatibility – Requirements and

tests. A third edition under the title given above is currently to be published. References to IEC 60601-1-2 in

this standard refer to the new edition.

3) A first edition of IEC 60601-1-6 exists, published in 2004 under the title Medical electrical equipment – Part 1-6:

General requirements for safety – Collateral Standard: Usability. A second edition under the title given above is

currently to be published. References to IEC 60601-1-6 in this standard refer to the new edition.

4) IEC 60651:1979 has been withdrawn and replaced by IEC 61672-1:2002 and IEC 61672-2:2003. Future editions

of this publication will be amended to take this fact into account.